The BCD300 battery charger provides up to 300 watts to charge a 12V or 24V battery system (1 or 2 banks) from a 24V, 32V or 36V source. The source and the batteries under charge must share a common ground.
The all-new single board design incorporates state of the art switchmode technology for unmatched efficiency and ultra-quite operation. Multiple stages of filtering reduce radiated or conducted noise to very low levels. The BCD300 Series is capable of charging up to two independent banks of batteries.
The two stage charging profile charges the batteries at a constant current equal to the maximum continuous output of the unit. When the battery voltages come up to the float voltage that the unit is set to, the current into the batteries will taper off as necessary to maintain the batteries at the float voltage.
The unit can be left permanently connected without fear of overcharge or damage to the batteries. The adjustable float voltage feature allows the unit to be used for any type of lead-acid battery including lead acid and gel cell.
Available options include a remote control and/or extra wide temperature. We are confident that you will get many years of reliable service from this Battery charger.
Adjustable output voltage for charging standard or deep cycle lead-acid, VRLA or Gel cell type battery
Audible & visual indicators for constant current, low input voltage, low output voltage & over-temperature
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI operation
Current limiting protection
Short circuit protection
Output over-voltage crowbar
Reverse input protection
Over temperature shutdown
Can be left permanently connected
Dry contact output fail relay
Wide operating temperature range (-25C to +40C)
3 year parts and labour warranty
Input 20-45, 12V out, 25A